Lets build some shelves
The list of boat projects is steadily growing as the days pass by. We have not even finished getting all of our stuff onboard and yet continue to find new projects to add to the list. Our primary goal for the end of this week is to empty the van and load everything onboard Bosco
When we moved aboard, we stored our clothes in two large duffel bags. However after just a couple of HOURS, random articles of clothing were scattered all about the boat. Its quite funny (and kind of sad) because we have simply resided to wearing the same thing all week (mostly because we are doing hard labor and only have one pair of “work” clothes). Not the most hygienic I know!
There are two identical compartments, like miniature closets, that sit side by side, on opposite sides of our V-berth cabin. We decided that the one inside the V-berth will hold all our clothes and the other will hold all our coats and foul weather gear. However when I attempted to hang up everything, I knew that there was NO WAY IN HELL our stuff would fit like this. The tiny compartments were in desperate need of some space management help in order to fit the vast amount of my clothes… and maybe Jake’s clothes if room is permitting. 🙂
So I did a test to see if there was space enough to fit our clothes if they were folded, rather than hung up. And realized quickly that this solution would be much more conducive to our small living quarters.
Jake fabricated cardboard templates from basic measurements that we took. We determined that two shelves would be perfect for the space, but they would both have slightly odd shapes since the back of each compartments curves significantly. They looked as if they’d be a perfect fit so we headed to the hardware store for materials. I thought it’d be a good idea to add a curved wooden “lip” on the front edge of the shelves to hold stuff in place better (quite common on all boat shelves).
Cutting the plywood and mounting blocks took a lot less time than imagined, since we brought a large plethora of tools, including a circular saw. We used a hand sander to fine-tune the edges since the wood wasn’t too thick and had the basic pattern set for our shelving unit.
Then we mounted the lip to the front edge of both of our shelves with glue and screws for extra holding power. Finally, I added some wood-colored contact paper to give it a nice smooth finish so that we wouldn’t cut ourselves or our clothes w/ the raw wood.
Up to this point, the project was going very smoothly and we thought the installation would be relatively simple. But, then we remember we are on a boat, and no boat project lasts less than 4 hours. And this one lived up to that reputation nicely. The first mounting block went in easy enough, but the the next one right across from it was a challenge because we had to drill through fiberglass. After a lot of unique yoga positions, scrunching and clambering to get the wood pieces in place we realized that the screws weren’t holding very well or going through the fiberglass easily. So we resorted to gorilla glue on the remaining shelf which worked beautifully. Jake did reinforce the upper shelf with a couple of smaller screws also, though that was probably overkill.
The end result was exactly how we wanted it! 3 shelves instead of one compartment, and now all of our clothes can actually fit in this one tiny ‘closet’. Though it is a pretty tight fit, it should work well. (after we get used to it of course) That’s one project we can check off the list! (plus the cabin is looking much less cluttered!)
You should check out Pinterest for ideas for boat storage they have some great ideas. I know my clothing consist of a lot of bathing suits one because I can clean and work in them two because they are easy to wash I wear a lot of clogs or barefoot and flip flops I only wear off the boat had a nice slip once and learned to just carry them to I hit land .good luck on your adventure our boat is on dry dock currently doing our first paint job
Thanks Maureen! I know my clothing selection will shift as we head down south and into the Caribbean! This fall we are planning to haul our boat out to repaint as well – hopefully that won’t be TOO daunting – good luck on your boat work as well 🙂
It was so fun to meet you guys this weekend! I enjoyed reading your blog posts and look forward to some well earned beers on the sunset deck before you head up to Maine and points beyond. Have a fun week and congratulations!!
Cheryl & Tom
you too!!! I hope you guys get your boat(s) in the water soon! I’m sure we will be seeing lots of ya’all at the marina!
I’m really enjoying your adventures on your boat. Let us know if you ever come down Melbourne, Florida way. 🙂
Thanks so much Sandy! We are heading down to FL this November/December timeframe (as of now) and will def. let you know more specifics as those days get closer.
So enjoyed catching up on your adventure on your blog! Thanks so much for allowing us to share it with you! Love AND prayers (as I said at your sail away party!), Penni
Thanks so much Penni! We really appreciate your support (and it was wonderful seeing you guys at our party!)